Festo Checkbox Compact CHB-C-X, Руководство пользователя

Страница: 93 / 148

5. Teaching parts
5−5
Festo P.BE−CB−COMP−en en 0503c
5.2 The Teach procedure
In the TEACH mode the Checkbox learns all the features for
the parts test (Teach data) when scanning sample parts.
·
Carry out the Teach procedure as realistically as possible.
Use e.g. the conveyor device and supply intended for the
later AUTO mode (if necessary activate with CheckKon:
[Window] [System parameters]
a
Transporting systems
a
Supply system ...
P
Activate supply system in Teach
mode ...).
·
Start the conveyor device.
CHB−C−P/..X
The following functions of the Teach procedure can be carried
out via the PLC interface:
tThe START/STOP mode
Selection of the parts type
Starting the Teach mode
Selecting the (next) orientation
Saving the Teach data
·
Set the desired parts type via the PLC interface.
Further information can be found in chapter 4.3.
Stop
·
Press the button START/
STOP
, in order to switch the
Checkbox into the Stop status.
·
Scan sample parts of the parts type one after the other in
all intended orientations (max. 8), as described below.