Festo Checkbox Compact CHB-C-X, Руководство пользователя

Страница: 122 / 148

A. Technical appendix
A−10
Festo P.BE−CB−COMP−en en 0503c
Operating displays
Display with control panel locking
Lock Display in Stop status or for 1.5 s when the START/STOP button is pressed.
Lock for the START/STOP and STATUS/TEACH buttons via PLC programming. A change of
operating mode is controlled exclusively by the PLC (see chapter 4.3).
Fix
Blockng the STATUS/TEACH button with the CheckKon configuration software (Para
meter System/Operating modes/Locking the Teach button = ..."). The Checkbox can be
started or stopped maually; a change to the Teach mode is not possible. Quit the mess
age with the START/STOP button.
Fault message
Details in chapter A.1.2.
E...
Fault code for system faults 01...99
F...
Warning 05
Display during the Teach procedure
1 o... Memory module of the parts type and
number of the sample part orientation
during the Teach procedure. 1...8
? ... Selecting the memory module of the parts type CHB..C: 1
CHB..P: 1..4
CHB..X: 1..9,a,b,c
C... C−value
maximum value of the scatter of characteristics for the current
feature which differs most
< 10: Sample parts are very similar in all features
> 30: Large scatter of at least one feature 0...999
tool Memory address assigned with measuring tool or optimized Teach data (CheckOpti)
Display during the test procedure
1 5
Tolerance value for the current parts type
1. Number: Number of the parts type
2. Number: Tolerance in % 1.Number:
CHB..C:
1
CHB..P: 1..4
CHB..X: 1..9,a,b,c
2.Number:
0...20