Festo Checkbox Compact CHB-C-X, Руководство пользователя

Страница: 47 / 148

2. Fitting and commissioning
2−17
Festo P.BE−CB−COMP−en en 0503c
Switching on
·
Switch on the operating voltage for the Checkbox via the
power unit.
·
Start the CheckKon in order to display and set the
system parameters during the TEACH and test modes
(see chapter 2.5).
·
Start the conveyor device, if necessary manually.
The illuminated buttons on the Checkbox light up briefly and
signalize the readiness to operate. The display shows briefly
the following items of system information one after the other:
LCD Explanation
IC 30 Ident code and version status of the operating system
04 E
1)
Number of memory locations and additionally the letter
E with operating systems with encoder evaluation.
2048
System setting of the camera resolution in pixels
Stop Ready to operate (AUTO mode: stop status)
1)
Operating system version ...E must be used for evaluating the
encoder signals. Consult your Festo Service if you wish to modify
your operating system.
Tab.2/4: Operating display when switched on
Lock
CHB−P/..−X
If Lock" is shown in the display, the buttons START/STOP
and STATUS/TEACH are locked (see chapter 4.3.8).