Festo Checkbox Compact CHB-C-X, Руководство пользователя

Страница: 9 / 148

Contents and general instructions
VII
Festo P.BE−CB−COMP−en en 0503c
Designated use
The Festo Checkbox ® has been designed for use under nor
mal operating conditions in closed rooms in industrial in
stallations.
The Checkbox Compact described in this manual is intended
exclusively for use as follows:
for contactless checking of the position and quality of small
parts e.g. screws, springs, bolts, which pass through on a
conveyor belt.
Use the Checkbox only as follows:
as intended in industrial installations.
in faultless technical condition.
without any modifications by the user Only the conver
sions or modifications described in the documentation
supplied with the product are permitted. The guarantee
will become invalid if the Checkbox is opened.
The maximum values specified for pressures, temperatures,
electrical connections etc. must not be exceeded.
Observe also the standards specified in the relevant chapters,
as well as national and local laws and technical regulations.