Feig Electronic ID ISC.MR102, Руководство пользователя

Страница: 44 / 153

Identification Manual ID ISC.MR102
FEIG ELECTRONIC GmbH Page 44 of 153 H01113-4e-ID-B.docx
4.10. CFG12: Read Mode - Filter
Byte 0 1 2 3 4 5 6
0x00 VALID-TIME
1
TR-ID 0x00
Default
0x0037
5,5sec.
0x01 0x00 0x00 0x01
Byte 7 8 9 10 11 12 13
Contents 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Default
VALID-TIME: (0...65535 x 100 ms = 0 ms ... 6553,5 sec)
(OperatingMode.NotificationMode.Filter.TransponderValidTime)
(OperatingMode.ScanMode.Filter.TransponderValidTime)
The period of time during which a Transponder can’t be read a 2 nd
time.
Note:

Changing of VALID-TIME only becomes effective after writing configuration
block CFG12 to EEPROM and reset of the RF Controller with
6.4. [0x64] System
Reset in mode 0x00.
TR-ID: (only for Scan Mode and Notification Mode)
TR-ID sets the parameters for Transponder identification.
If several Transponders has the same content in the addressed data block, only one da-
taset will be generated.
Byte: 2 3 4 5
Function TR-ID-
SOURCE
TR-ID-DB-ADR TR-ID-DB-N
TR-ID-SOURCE: (OperatingMode.Miscellaneous.TransponderIdentification. Source)
Sets the data source for Transponder identification.
b0
data block
b1 Serial Number
TR-ID-DB-ADR (OperatingMode.Miscellaneous.TransponderIdentification.
DataBlockNo)
Sets the address of the data block for Transponder identification. If ID-SOURCE
selects the Serial Number as data source, the ID-DB-ADR will be ignored.
TR-ID-DB-N (OperatingMode.Miscellaneous.TransponderIdentification.
NoOfDataBlocks)
Sets the number of data blocks to be read for Transponder identification. If ID-
SOURCE selects the Serial Number as data source, the ID-DBN will be ignored.