Identification
Manual
ID ISC.MR102
FEIG ELECTRONIC GmbH
Page 3 of 153
H01113-4e-ID-B.docx
General information's regarding this document
If bits within one byte are filled with "-", these bit spaces are reserved for future extensions or
for internal testing- and manufacturing-functions. These bit spaces must not be changed, as this
may cause faulty operation of the reader.
The following figure formats are used:
0...9:
for decimal figures
0x00...0xFF:
for hexadecimal figures,
b0...1
for binary figures.
The hexadecimal value in brackets "[ ]" marks a control byte (command).
