Feig Electronic ID ISC.MR102, Руководство пользователя

Страница: 124 / 153

Identification Manual ID ISC.MR102
FEIG ELECTRONIC GmbH Page 124 of 153 H01113-4e-ID-B.docx
8.3.10. NXP (I-Code SLIX)
Chip ID: 2h = 00000001b (Bit 47 - 40 of UID)
Memory organization: 32 x 4 Byte = 1280Bit
Number of blocks 28 (user area: 0
– 27)
Number of pages 10 (user area: 0
– 9)
Block size 4 byte Page size 16 byte = 4 Blocks
Command
Code Function Mode Comment
non-
addressed
addressed select
0x01 Inventory

- - -
0x02 Stay Quiet

-

-
0x22 Lock Multiple Blocks
   
WR-OPTION = 0
*
0x23 Read Multiple Blocks


**
 
DB-Size = 4
0x24 Write Multiple Blocks
   
DB-Size = 4,
WR-OPTION = 0
*
0x25 Select

-

-
0x26 Reset to Ready
   
0x27 Write AFI
   
WR-OPTION = 0
*
0x28 Lock AFI
   
WR-OPTION = 0
*
0x29 Write DSFID
   
WR-OPTION = 0
*
0x2A Lock DSFID
   
WR-OPTION = 0
*
0x2B Get System Information
   
0x2C Get Multiple Block Security
Status
- - - -

The WR-OPTION will be set automatically by the FEIG Readers if the WR-OPTION pa-
rameter in “ CFG4 Transponder Parameters ” is set to “00: automatically set”.
** Reading of one block in non addressed mode is only possible, if parameter “Read
Mode” in “CFG4 Transponder Parameters” is set to “b01: Single Read“.