FBII XL-20, Инструкции по подключению и установке

Страница: 52 / 83

Section 9 - System Programming
9–19
Question 23, L1 & L2 - Keypad Fire Code Default = AA
L1 - L2 is the Alarm code that will be transmitted upon activation of the Keypad Fire
condition (pressing the two Fire keys or the 7 & 9 keys on the keypad). This code can
vary from any of the zones that are programmed as Fire.
Question 23, L3 & L4 - Keypad Auxiliary Code Default = AA
L3 - L4 is the code transmitted to the CS for Keypad Aux. condition (pressing the two
Aux keys or 1 & 3 from the keypad).
NOTE: These keypad emergency conditions are optional and can be enabled within question
#05 of the programming sequence. If either or both of these transmissions are not desired,
program their respective locations as “AA.”
QUESTION 24
CS CODES RF LOW BATTERY & SUPERVISION
DEFAULT = AAAA
There are 4 locations (L1-L4) in this question:
Question 24, L1 - RF Low Battery Code Default = A
Question 24, L2 - RF Low Battery Restore Default = A
Question 24, L3 - RF Supervisory Default = A
Question 24, L4 - RF Supervisory Restore Default = A
QUESTION 25
CS CODES BELL SUPERVISION & TAMPER
DEFAULT = AAAA
There are 4 locations (L1-L4) in this question:
Question 25, L1 & L2 - Bell Supervision Code Default = AA
Question 25, L3 - RF Tamper Code Default = A
Question 25, L4 - RF Tamper Reset Default = A
QUESTION 26
RF ZONES
DEFAULT = 00A0
There are 4 locations (L1-L4) in this question:
Question 26, L1 - RF Zones 5-8 Default = 0
Question 26, L2 - RF Zones 1-4 Default = 0
L1 - RF Zones 5-8 L2 - RF Zones 1-4
RF ZONES RF ZONES
Digit
8 7 6 5
Digit
4 3 2 1
0 None 0 None (Zones 1-4 Are Hardwired)
1
9
1
9
2
9
2
9
3
9 9
3
9 9
4
9
4
9
5
9 9
5
9 9
6
9 9
6
9 9
7
9 9 9
7
9 9 9
8
9
8
9
9
9 9
9
9 9
A
9 9
A
9 9
B
9 9 9
B
9 9 9
C
9 9
C
9 9
D
9 9 9
D
9 9 9
E
9 9 9
E
9 9 9
F
9 9 9 9
F
9 9 9 9