FBII XL-20, Инструкции по подключению и установке

Страница: 60 / 83

11–1
S E C T I O N 1 1
Data Entry Via LED Based Keypads
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
General Information
This section describes the physical keystrokes necessary to perform keypad programming,
and tells how to interpret the data displayed on LED-based keypads during programming
operations. NOTE: Actual keypad programming should be performed after completion of the
programming sheet.
How to Enter Programming Mode Via Keypad
The SYSTEM programming mode can be entered ONLY WHILE DISARMED, as follows:
TO ENTER INSTALLER PROGRAMMING: [CODE][*][INSTALLER][1]
Where:
[CODE] Press the CODE button
[*] Press the asterisk (*) button
[INSTALLER] Enter the 4-DIGIT INSTALLER CODE (default = 2468)
[1]
Press “1” button. This indicates Installer Mode 1.
What You See on the LED Keypad
Program Mode = Ready LED Pulsing
As soon as you enter the Installer Keypad Programming mode, the READY LED will slowly
pulse, and will continue to pulse until you leave this mode. The remaining LEDs display the
question number and location contents as indicated below:
ARM
AC/LB
READY
1
2
3
4
5
6
7
8
STAY
INST
COVER
OPEN
Stay Instant
Bypass Code
*
0 #
7 8 9
4 5 6
1 2 3
P A F
+1
+2
+4
+8
+16
TX LB
RF. SPVR
+1
+2
+4
+8
Question Number
Data