![background image](http://html1.mh-extra.com/html/fbii/xl-1s/xl-1s_hookup-and-installation-instructions_547073050.webp)
9–1
S E C T I O N 9
Data Entry via LED & LCD Keypads
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
This section describes the physical keystrokes necessary to perform keypad programming
and how to interpret the data displayed on the LED based keypads (XK-104) and on the LCD
keypad (6805) during programming operations. NOTE: Actual keypad programming should
be performed after completion of the programming sheet.
Entering Programming Mode via Either LED or LCD Keypads
The SYSTEM programming mode can be entered WHILE DISARMED ONLY as follows:
TO ENTER INSTALLER PROGRAMMING:
[CODE][*][INSTALLER][1]
Where:
[CODE]
Press the CODE button
[*]
Press the asterisk (*) button
[INSTALLER]
Enter the 4 DIGIT INSTALLER CODE (default = 2468)
[1]
Press “1” button. This indicates Installer Mode 1.
What You See on the LED Keypad
Program Mode = READY LED:
Upon entering the installer keypad programming mode the READY LED will slowly pulse,
and will continue to pulse until leaving this mode. The remaining LEDs display the question
number and location contents as indicated below:
ARM
INSTANT
STAY
XK-104
AC/LB
READY
1
2
3
4
+ 1
+ 2
+ 4
+ 8
SLOWLY PULSING
+ 1
+ 2
+ 4
+ 8
+ 16
QUESTION
NUMBER
LOCATIONS
CONTENTS
(DATA)
Question Numbers = Zone LEDs
There are 20 total questions, with multiple data entry locations.
Zone LEDs 1 through 5 display the current QUESTION NUMBER (not the specific location
within each question) as follows:
In the diagram shown on the following page, the question number is the total you get when
you ADD the values of all LEDs that are ON.
Содержание XL-1S
