manualshive.com logo in svg

FBII XL-1S, Инструкции по подключению и установке, Страница: 31 / 71

Поделиться
Скачать
FBII XL-1S Скачать руководство пользователя страница 31

7–1

S E C T I O N   7

Installer Modes

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

TO ENTER INSTALLER MODE: [CODE][*][INSTALLER][X]

Where:
[CODE]

Press the CODE button

[*]

Press the asterisk (*) button

[INSTALLER] Enter the 4 digit installer code (default = 2468)
[X]

Press the single digit indicating the installer mode as follows:
1 Installer Keypad Programming

Press 1 & 3 (at the same time)

SYSTEM DEFAULT

Press 7 & 9 (at the same time)

USER CODE DEFAULT

Installer Mode 1 (Installer Keypad Programming)

Enters the installer into keypad programming mode. Refer to the Keypad Programming
Section of this Manual. NOTE: There exists an option in the EZ-Mate Downloader Software
to inhibit keypad programming. If selected, then a negative acknowledgment (4 short beeps)
will be heard after attempting to enter this mode. The software has another option (Default
Lockout) to inhibit another installer from defaulting the panel and entering keypad
programming. This prevents hostile account takeovers.

Installer Mode 1 (System Default)

Any of the system keypads (LED & LCD) can initiate a system default of the system by
pressing the “1” and “3” keys at the same time, while in the programming mode. The
system will then default (revert to factory program values) and go through the reset
sequence and THE SYSTEM WILL UNDERGO THE WARMUP TIME SEQUENCE. A
system default can also be generated by removing power (AC & DC), shorting JP1 & JP2,
reapplying power (with JP1 & JP2 still intact) waiting 8 seconds, and then removing short
with power still applied. NOTE: A programming option can be selected through the EZ-Mate
Downloader Software known as Default Lockout. If selected, then a system default reset
will change all of the programmable options with the exception of the CSID (a code used by
the software to identify the panel during remote connections) and the installer code. This
prevents hostile account takeovers.

Installer Mode 1 (User Code Default)

The user codes can be reset to factory default values (User Code 1 = 1234) by pressing the
“7” and “9” keys at the same time, while in the programming mode. The user codes will
default and the system will go through the reset sequence and THE SYSTEM WILL
UNDERGO THE WARMUP TIME SEQUENCE.

Installer Mode 2 (System Log View)

The system retains the past 2 alarm memory conditions; this can contain from 1 – 6 alarms
per arming cycle or up to 12 alarms for two arming cycles. LED keypads will display alarms
as fast blinking cone lights along with a fast blinking ready (RDY) light. In both keypad
types (LCD and LED), the display will show the events starting from the oldest event.
Pressing of the “#” key will advance the log to the most recent alarm in memory. To exit from
the system log view mode press the “*” key. NOTE: as the log is advanced, the LCD keypad
will scroll through all zones that were in alarm for the event. The system log cannot be
cleared by the keypad. It can only be cleared by the Downloader Software. On LCD keypads

Содержание XL-1S








































































Отзывы:

Нет отзывов