FBII XL-1S, Инструкции по подключению и установке

Страница: 41 / 71

Section 8 - System Programming
8–7
QUESTION 06
SYSTEM TIMEOUTS
DEFAULT = 665F
There are 4 locations (L1-L4) within this question which define various system timing
options as follows:
Question 06, L1
Entry Delay 1
Default = 6
Enter the desired entry delay time. If zones 1 & 2 are delay zones, they follow entry delay 2.
Refer to Entry Times below for valid choices. For UL applications the maximum entrance
delay shall not exceed 45 seconds for household applications or 15 seconds for commercial
burglary applications.
Digit ENTRY TIMEOUTS
0 1 SECOND
1 5 SECONDS
2 10 SECONDS
3 15 SECONDS
4 20 SECONDS
5 25 SECONDS
6 30 SECONDS
7 35 SECONDS
8 40 SECONDS
9 45 SECONDS
A 50 SECONDS
B 55 SECONDS
C 1 MINUTE
D 1 MINUTE 5 SECONDS
E 1 MINUTE 10 SECONDS
F 3 MINUTES
Question 06, L2
Exit Delay
Default = 6
Enter the desired exit time. NOTE: For UL applications the maximum exit delay shall not
exceed 60 seconds.
Digit EXIT TIMEOUTS
0 1 SECOND
1 10 SECONDS
2 20 SECONDS
3 30 SECONDS
4 40 SECONDS
5 50 SECONDS
6 1 MINUTE
7 1 MINUTE 10 SECONDS
8 1 MINUTE 20 SECONDS
9 1 MINUTE 30 SECONDS
A 1 MINUTE 40 SECONDS
B 1 MINUTE 50 SECONDS
C 2 MINUTES
D 2 MINUTES 10 SECONDS
E 2 MINUTES 20 SECONDS
F 3 MINUTES
Question 06, L3
Burglary Bell Cutoff
Default = 5
Enter the desired bell cutoff time on alarm conditions for burglary and panic in 3-minute
intervals. The valid range of input is 1 - F, with F indicating an infinite burg bell cutoff.
Example 3 = 9 minutes. For UL installations in commercial applications the minimum bell
cutoff shall be 15 minutes, or 6 minutes for household burglary applications.