Fairlight CVI, Руководство пользователя

Страница: 142 / 283

STEN C I L W I PES
Stencil w ipes
alter what is on the
s t e nc i l plane.
The stencil
plane is an internal digital control image (equivalent to a 'key' or
'matte' in some applications) with multiple uses. The
Stencil wipes
are simi lar to the
Col our wipes,
in that they a ffect the entire
screen, with the difference tha t the stencil wipes are applied to
the
i n ternal stencil plane instead of the field store.
Whatever is selected on the above menu is implemented when
the WIPE STENCIL button is pushed. The light in the WIPE
STENCIL button will go
On
when the button is pressed, and will
go
Off
when the stencil wipe is complete. For the wipe to have
an observable effect, the STENCIL SOURCE menu must be set to
either
Internal or Under-over, and the USE STENCIL button must
be on. The wipe may be stopped a t any stage by pushing the
STOP button.
The
Stencil Draw/Erase
selection in Pain t Men u
4
is very
importa nt to the stencil wipes. If this is set to Draw, a stencil
wipe will usually clear the stencil insta ntly to
Off,
then turn the
stencil On as required. If it is set to E rase, a stencil wipe will
usually clear the stencil to On then erase the stencil as required.
If the INVERT STENCIL button is on, the stencil polarity will
flip. The details are given for each wipe below.
The functions of the various stencil wipes selections are easily
examined by enabling the
Stencil Show
selection in Paint Men u
4.
32
-
PAINT MENU