Fairlight CVI, Руководство пользователя

Страница: 130 / 283

C O LO U R CO N TRO L M E N U
This section of the menu enables various selections with regard
to the use of
stencils
in addi tion to a selection which enables the
use of the BEEPER.
Stencil
Draw/Erase:
This selection enables the drawing of
an internal stencil. If
Stencil Draw
is selected and the DRAW
STENCIL button is activated, an internal stencil can be created
by drawing on the GRAPHICS PAD or by using one of the
Stencil
w i p es.
If
S tencil Erase
is selected, areas of a stencil already created
can be erased, either by use of the GRAPHICS PAD or a
STENCIL WIPES menu selection.
The
Stencil Draw/Erase
selections are used in conjunction with
the DRAW STENCIL, USE STENCIL and INVERT STENCIL
bu ttons and the STENCIL WIPES menu.
Stencil H ide/Show:
If
Stencil Hide
is selected any internal
stencil will not be seen. There may be circumstances when you
require this stencil
indicator
to be
Off,
for instance, if you are
recording an effect which involves the actual process of stencil
drawing.
Alternatively if the
Stencil Show
selection is made then the
areas where the stencil is
On
become brighter than those areas
where it is
Off,
provided that the DRAW STENCIL button is
activated. This indicator should normally be
On
whenever you
wish to draw on the stencil plane, otherwise it will be difficult to
determine what you are drawing.
D raw Over/ U nder:
The
Draw Over
will not activate stencils
as protected areas. This selection may be useful if, for example, a
stencil area is activated with the USE STENCIL button while
using the
Paint/Analog
selection in the DISPLAY CONTROL
menu. Where the stencil is activated to determine paint and video
areas within one image, the stencil activated paint display can be
updated with further painting actions, even though USE STENCIL
is
on.
B eeper Off/On:
If this selection is
On,
the CVI's inbuilt
BEEPER will sound to signify that a function is complete or that
a cue point has been reached in the
Sequencer.
20
-
PAINT MENU