Fairford Electronics QFE Series, Руководство пользователя

Страница: 93 / 194

FD8416 5MC Parameters
03 September 2003
55
55 55
55
Software .
11
11 11
11
8 STATUS 1 1 255 0 flags Read Only
no description
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
9 STATUS 2 0 99 1 flags Read Only
no description
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
10 STATUS 3 0 255 0 flags Read Only
no description
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
11 SOFT START PEDESTAL 20 60 10 % Read/Write
Starting point of soft start as percentage of supply volts
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
12
SOFT START TIME 5 255 1 Secs Read/Write
Soft start Period over which unit ramps voltage to motor Normally start times are in the range 5-30
seconds, long ramptimes over 1minute are
for special applications only. The start
(without current limit) is purely a voltage
ramp. For lightly loaded motors they will
normally reach full speed before the end of a
long ramp.
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
13 KICK PEDESTAL 75 90 60 % Read/Write
short Kick of voltage at start of ramp to dislodge sticky load.
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
14 KICK TIME 25 40 10 cycles Read/Write
Number of cycles for which kick is applied (if selected).
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
15 DWELL TIME 5 255 1 Secs Read/Write
Period of time following soft start allowed for load to settle
before optimising commences ( if selected).
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
Page 2 of 17