Fairford Electronics QFE Series, Руководство пользователя

Страница: 100 / 194

FD8416 5MC Parameters
03 September 2003
55
55 55
55
Software .
11
11 11
11
65 I/P1 MAP TO 52 125 0 prmtr Read/Write
Value is parameter number which is the destination for the
I/p1 bit.
Parameter 66 holds the mask for mapping I/p1 into. This is normally the start/stop I/p (remote).
It would be unusual for it to be anything else.
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
66 I/P1 BIT MASK 16 128 0 mask Read/Write
Parameter 66 holds the mask for mapping I/p1 into.
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
67 I/P2 MAP TO 0 125 0 prmtr Read/Write
Value is parameter number which is the destination for the
I/p2 bit.
Parameter 68 holds the mask for mapping I/p2 into.
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
68
I/P2 BIT MASK 0 128 0 mask Read/Write
Parameter 68 holds the mask for mapping I/p2 into.
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
69 I/P3 MAP TO 0 125 0 prmtr Read/Write
Value is parameter number which is the destination for the
I/p3 bit.
Parameter 70 holds the mask for mapping I/p3 into.
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
70 I/P3 BIT MAP 0 128 0 mask Read/Write
Parameter 70 holds the mask for mapping I/p2 into.
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
71 CONTACTOR DELAY 160 800 20 mS Read/Write
Following a start command this is the delay allowed for the
main incomming contactor to close. After this time a phase
loss detection routine checks for the incomming supply.
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
4
Std
72 TRIP SENSITIVITY 1 15 1 none Read/Write
An arbitrary number to adjust the sensitivity of some of the
fault trips. The larger the number the slower the trip.
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
Page 9 of 17