Fairford Electronics QFE Series, Руководство пользователя

Страница: 145 / 194

Programming
page 5-34
QFE
FD8420 issue02_F
5.4.9 Changing a password.
Note: This example assumes that the unit has been disabled (see section 5.4.1 ) and if
necessary has already been unlocked (see section 5.4.10 ).
1. With
Starter Disabled
displayed press the
Enter
button once.
2. With
Applications
shown on the top line of the display, press the button until
Password
takes it’s place on the top line.
3. Press the
Enter
button once to select the
Password
menu.
4. Press the button once and
Change Password
will be displayed on the top line.
5. Press
Enter
once to select
Change Password
. A cursor will be visible on the
bottom line of the display.
6. Use the or button to enter a new password number.
7. Press the
Enter
button once.
8. The display will flash
New Password!
twice to confirm that the change has been
made.
9. Press the
#
button three times to return to
Starter Disabled
.
Notes
1. The unit must be unlocked (section 5.4.10 ) in order to change the password.
2. Setting the password to zero (0) deletes any set password and leaves the unit un-
locked AFTER the control supply has been cycled or the keypad/keypod has been
reset.
3. It is not necessary to save the password as it is stored automatically every time that
it’s value is changed.
Enter
#
Enter
#
1
2
3
4
5
6
x 5
x 1
#
x ?
9
8
7
9
9