Fairford Electronics QFE Series, Руководство пользователя

Страница: 106 / 194

FD8416 5MC Parameters
03 September 2003
55
55 55
55
Software .
11
11 11
11
104 opf2_mask 0 11 0 mask Read/Write
User flag mapping through parameters 101,102,103,104.
101,102 give source flag address
101=parameter 102 = bit mask
103,104 give the destination flag address.
103=parameter 104 = bit mask
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
105 loop_input 41 125 0 prmtr Read/Write
The value is the number of the parameter which will be the
source for control loop setpoint.
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
106 loop_feedback 26 125 0 prmtr Read/Write
The value is the number of the parameter which will be the
source for control loop feedback.
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
107 error_gain 37 255 1 none Read/Write
Multiplier for the loop error signal.
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
108
error_div 7 255 1 none Read/Write
divisor for the loop error signal
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
109 max_slope 10 50 0 none Read/Write
The maximum allowed single error in open loop.
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
110 guard gap 10 150 0 none Read/Write
The minimum allowed firing delay in both open loop and
pahse control modes. This allows for jitter and power factor
of the load.
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
111 user parameter 0 255 0 none Read/Write
This parameter may be set by the user via the serial link.
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
Page 15 of 17