Fairford Electronics QFE Series, Руководство пользователя

Страница: 172 / 194

page 5-61
Programming
QFE
FD8420 issue02_F
5.5.9 Using the DC input to set a parameter’s value, (applies to plus units only).
In this example the
Start Time
(P12) is adjusted by means of the 0-10v DC Programmable
Input. The following instructions describe how to program the input for this type of application .
1. With
Stopped and ready
displayed, press the
Enter
button once.
2. With
Applications
at the top of the display, press the button until
Inputs
shows on
the top line of the display.
3. Press
Enter
once.
4. With
Digital i/p 1
showing, press the button until
DC i/p
is on the top line of the
display.
5. Press
Enter
once.
6. Scroll down with the button until
Map To
is on the top line of the display.
7. Press
Enter
once.
8. Using the and buttons select
12 Parameter
.
9. Press
Enter
to apply the change. The display will flash once to confirm the change has
been accepted.
10. Press
#
four times to return to
Stopped and ready
. Adjusting the DC i/p will now
adjust the start time.
Please remember to keep the above settings they must be permanently saved. See section
5.4.5
Enter
#
Enter
#
2
3
4
5
6
x 6
10
10
10
#
x 12
7
8
x 5
9
x 1
10