Fairford Electronics QFE Series, Руководство пользователя

Страница: 173 / 194

Programming
page 5-62
QFE
FD8420 issue02_F
5.5.10 Mapping the Load Current to Analogue Output 2, (applies to plus units only).
In this example the user will be able to take some real-time information from the unit and
transfer it to the outside world in the from of an analogue signal.
1. With
Stopped and ready
displayed, press the
Enter
button once.
2. With
Applications
at the top of the display, press the button until
Outputs
appears
on the top line of the display.
3. Press the
Enter
button once.
4. With
Led
on the top line of the display, press the button until
Analogue o/p 2
appears on the top line.
5. Press the
Enter
button once.
6. Use the or buttons to select
26 Parameter
.
7. Press
Enter
to apply the change. The display will flash once to confirm the change has
been accepted.
8. Press the
#
button three times to return to
Stopped and ready
.
Please remember to keep the above settings they must be permanently saved. See section
5.4.5
x 7
x 6
x 4
1
2
3
4
5
8
7
6
8
8
#
#
Stopped and ready Applications
Auto Features
#
Outputs
Parameters
Led
K1
Analogue o/p 2 Analogue o/p 2
22 Parameter
Analogue o/p 2
26 Parameter
Analogue o/p 2
26 Parameter