Fairford Electronics QFE Series, Руководство пользователя

Страница: 160 / 194

page 5-49
Programming
QFE
FD8420 issue02_F
7. Check that
9 Parameter
is showing - if it isn’t press the button until it is displayed.
8. Press
Enter
once to apply any changes and the display will flash once to confirm the
changes have been accepted.
9. Press
#
once to return to
Map From
.
10. With
Map From
on the top line of the display press the button once until
Bit Number
is displayed.
11. Press
Enter
once to select
Bit Number
.
12. With the cursor on the LSB press the button once to change the bit state to zero (0).
13. Press the
Optimise
button until the cursor is displayed on bit 2.
14. Press the button once to change the bit state to one (1).
15. Press
Enter
once to apply the change. The display will flash once to confirm the change
has been accepted.
16. Press
#
four times to return to
Stopped and ready
.
Please remember to keep the above settings they must be permanently saved. See section
5.4.5
10
9
11 12 13 14
15
16
7
#
x ??
8
#
x 1