Fagor CNC 8070, Руководство по эксплуатации

Страница: 99 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operating manual
CNC 8070
MANUAL (
J
OG)
MODE
Appear
ance
of
t
h
e
M
anua
l (
J
O
G
) m
o
de
4.
(S
OFT
V03.0
X
)
65
4.1.1 Description of a typical screen of this work mode
A typical screen of the jog mode can show the following information:
A. Information related to the position of the axes. In the screen configuration supplied
by Fagor, the data displayed will be different on each screen.
The most common thing is to show the current position of the axes referred to part
zero in large characters, and the amount of following error (axis lag) in small
characters.
Another more detailed option shows the coordinates of the tool tip and those of
the tool base, being both referred to part zero and machine zero.
B. Active "M" functions.
C. Active "G" functions and high-level commands.
D. Tool related information.
Tool number "T" currently selected and active tool offset "D" associated with the
tool.
E. Information related to the spindle speed "S".
"Sreal" Actual spindle speed.
"Sprog" Programmed speed.
"S%" Percentage of speed override being applied on to the programmed
value.
Depending on the active screen, it will also show the spindle position "SPOS" and
its following error "SFWE".
F. Information related to the feedrate "F" of the axes:
"Freal" Actual feedrate of the axes.
"Fprog" Programmed feedrate.
"F%" Percentage of feedrate override being applied on to the
programmed value.
G. Moving mode selected at the jog selector switch on the operator panel.
H. Reserved.
A
B
C
D
E
F
G H