Fagor CNC 8070, Руководство по эксплуатации

Страница: 124 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operating manual
CNC 8070
5.
M
ANUAL
(J
OG
) MODE.
TOOL
CALI
B
RAT
IO
N
Aut
o
m
a
ti
c ca
libr
at
ion wi
th
a pr
o
be and a
c
anned
c
ycl
e
(S
OFT
V03.0
X
)
90
Definition of data
To define the data, place the focus on the relevant data, key in the desired value and
press [ENTER]. To change icons, place the focus on it and press [SPACE].
Tool calibration steps
To calibrate the length, follow these steps.
1. Select the tool and the offset to be calibrated. It is not necessary to insert the tool
into the spindle; the CNC carries out this operation if necessary.
2. Define the data defining the calibration.
3. Press the [CYCLE START] key to start the calibration. The CNC calibrates the
tool making all the necessary movements; there is no need to manually approach
the tool. If necessary, the CNC makes the tool change.
4. After the calibration It updates the tool table data.
Data Meaning
T Tool to be calibrated.
D Tool offset to be calibrated.
Ds Safety distance.
F Probing feedrate.
If not defined, the movements are carried out at the default feedrate,
set by the machine manufacturer.
PRB1MAX
···
PRB2MIN
Probe position.
The values defined here are only taken into account during the
calibration cycle; they do not modify the machine parameter values.