Fagor CNC 8070, Руководство по эксплуатации

Страница: 100 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operating manual
CNC 8070
4.
MANUAL (
J
OG)
MODE
Appear
ance
of
t
h
e
M
anua
l (
J
O
G
) m
o
de
(S
OFT
V03.0
X
)
66
4.1.2 Vertical softkey menu (icons)
Display units (millimeters/inches).
It is used to change the units for displaying the position (coordinates) of the linear axes
and the feedrate data. Toggling these units does not affect the rotary axes which will
always be displayed in degrees.
The icon highlights the units currently selected (millimeters or inches).
It must be borne in mind that the units can only be changed on the data display. A
program assumes the units defined with the active function "G70" or "G71", or, when
not programmed, the units set by the machine manufacturer.
Load zero offset or fixture offset tables.
It may be used to save the active zero offset in the zero offset or fixture offset table.
Tool calibration.
It accesses the tool calibration screens.