Fagor CNC 8070, Руководство по эксплуатации

Страница: 132 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operating manual
CNC 8070
6.
EDI
T
IN
G-
SI
MULATI
ON MODE
Edi
ti
ng wi
n
dow
(S
OFT
V03.0
X
)
98
Softkey menu of the editing window
When selecting the editing window, the horizontal softkey menu shows the options
for this window. The set of options offered by this menu may be changed using the
"+" softkey which offers a new set of options.
The options available in the softkey menu are the following. See "6.3 Editing
window (softkeys)" on page 102.
‡
"Open program"
To select a program for the editing - simulation mode.
‡
"File"
To restore, save, save with another name or print a program. It can also be used
to import the contents of another program, of a DXF file or PIM and PIT files.
‡
"Undo"
To "undo" the last modifications made.
‡
"Operations with blocks"
To copy, cut and paste information of a block or set of blocks within the program.
It can also copy a block or set of blocks as an independent program.
‡
"Find/replace"
To search for a line or text in the program being edited. It can also replace a text
with another text.
‡
"Customize"
To customize the appearance and the properties of the editing window.
‡
"Profile editor"
To access the profile editor and define a new profile or modify an existing one.
‡
"Cycle editor"
To access the conversational editor for machining and positioning canned cycles.
‡
"TEACH-IN ON / TEACH-IN OFF"
To turn on or off the TEACH-IN mode.