Fagor CNC 8070, Руководство по эксплуатации, Страница: 256 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operation manual
8070 CNC
11.
PLC
"P
rogr
am
s"
ser
v
ic
e
(S
OFT
V03.0
X
)
222
11.2.1 PLC project (softkeys)
These options are used to create a PLC project and compile it to create the executable
PLC program.
PLC project "Add file"
It is used to add a file to the PLC project. This file may be a new one or an existing
one. When selecting this option, the CNC shows a list of the available files.
To add a file to the PLC project.
1. Select the file from the list or write its name in the bottom window.
2. Press [ENTER] to accept the selection and add the file or [ESC] to cancel the
selection and close the file listing.
When accepting the selection, the selected file will appear on the list that make up
the PLC project.
PLC project "Generate PLC"
It compiles and loads the PLC program based on the files that make up the PLC
project. If an error occurs during compilation, the program will not be generated and
the CNC will display a list of the detected errors.
Keys for selecting a service
To switch windows.
To move the cursor through the elements of the list.
To add the selected file.
To cancel the selection and close the program listing.