Fagor CNC 8070, Руководство по эксплуатации

Страница: 25 / 358

CNC 8070
Saf
e
ty
condi
ti
on
s
(S
OFT
V03.0
X
)
XIII
PRECAUTIONS DURING REPAIR
‡
Do not get into the inside of the unit.
Only personnel authorized by Fagor Automation may manipulate the inside of
this unit.
‡
Do not handle the connectors with the unit connected to AC power.
Before manipulating the connectors (inputs/outputs, feedback, etc.) make sure
that the unit is not connected to AC power.
SAFETY SYMBOLS
‡
Symbols that may appear on the manual.
‡
Symbols that the product may carry.
Symbol of danger or prohibition.
It indicates actions or operations that may hurt people or damage
products.
Warning symbol.
It indicates situations that certain operations could cause and the
suggested actions to prevent them.
Obligation symbol.
It indicates actions and operations that must be carried out.
Information symbol.
It indicates notes, warnings and advises.
i
Ground protection symbol.
It indicates that that point must be under voltage.