Fagor CNC 8070, Руководство по эксплуатации, Страница: 297 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operating manual
CNC 8070
MACHI
NE PARAMETERS
O
p
e
rat
ions wi
th
t
a
bl
e
s
12.
(S
OFT
V03.0
X
)
263
12.3 Operations with tables
12.3.1 Data editing and validation
Use the softkey menu to select the desired machine parameter table. To edit the table
data, proceed as follows:
1. Use the cursor to select the parameter whose value is to be set.
2. Key in the desired value. If [SUP] is pressed, the parameter will assume the default
value.
3. Press [ENTER] to accept the new value or [ESC] to ignore the new value and
recover the previous one.
Parameter types
Certain parameters can only assume specific values. These parameters will be
identified as follows.
Depending on the type of values they can assume, they will be defined as follows:
• If the parameter may assume a value between specific limits, enter the desired
value.
If the value exceeds those limits, the parameter will assume its default value.
• If the parameter contains a list of options, press [ENTER] to display the drop list
and select one of those options.
• If the parameter refers to a file, press [ENTER] and the CNC will show the list of
available files.
Data validation.
To validate certain parameters, restart the CNC. These parameters will be identified
with the following symbol next to their name:
The parameter has a list of options.
The parameter refers to a file.
After editing or modifying the table data, the new values must be validated so they
are assumed by the CNC. To validate the data, press the VALIDATE icon.
Restarting the CNC required.