Fagor CNC 8070, Руководство по эксплуатации, Страница: 48 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operating manual
CNC 8070
2.
HOW
TO
OPERATE THE
CNC
Scr
een des
cr
ip
ti
on
(S
OFT
V03.0
X
)
14
2.1.1 Detailed description of the CNC status bar
The top of the screen shows the following information:
A. Icon (customizable) identifying the manufacturer.
B. Icon showing the status of the program of the active channel:
The background color will be different depending on the status of the program.
C. Program selected in the active channel for execution.
The background color will be different depending on the status of the program.
D. Number of the block in execution. The bottom icon indicates that the Single-block
execution mode is active.
E. Information about the channels.
Number of channels available and active channel (indicated in blue). Icons show
which operating mode each channel is in.
The channel synchronization window may be expanded using the [ALT]+[S] keys.
The synchronization is carried out using marks in the programs. The window
shows for each channel whether it is waiting for synchronization marks or not and
the status of those marks in the channel that originates them.
An LED of various colors of the window show the status of the synchronization marks
of each channel. On the left, the channels waiting for the marks and on top the
channels that originate them.
Programmed stopped.
Program in execution.
Background color: Green.
Program interrupted.
Background color: Dark green.
Program in error.
Background color: Red.
Execution mode.
Jog mode.
MDI mode.
White No synchronization mark expected.
Green Synchronization mark expected. The mark is set to 1 in the channel
that originates it.
Red Synchronization mark expected. The mark is set to 0 in the channel
that originates it.
A B C D E F
G H