Fagor CNC 8070, Руководство по эксплуатации

Страница: 139 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operating manual
CNC 8070
EDI
T
IN
G-
SI
MULATI
ON MODE
Ed
it
ing wi
ndo
w (
s
of
tk
eys)
6.
(S
OFT
V03.0
X
)
105
6.3.4 Operations with blocks
It is used to copy, cut and paste the information of a block or set of blocks and export
this information as an independent program.
This option is only available when there is a text selected in the program or on the
clipboard. To select a text in the program, keep the [SHIFT] key pressed while moving
the cursor.
Operations with blocks "Copy"
It copies the selected text onto the clipboard.
Operations with blocks "Cut"
Copies the selected text onto the clipboard and deletes it from the program.
Operations with blocks "Paste"
Pastes the contents of the clipboard into the program.
Operations with blocks "Copy to program"
Saves the selected texts as an independent program.
When selecting this option, the CNC shows a list of the available programs.
To save the text as a program:
1. Select the destination folder.
2. Write the program name in the bottom window. To replace an existing program,
select it from the list.
3. Press [ENTER] to save the program or [ESC] to cancel the selection and close
the program listing.
When selecting this option, the softkey menu shows the available options. To return
to the main menu, press the key for the previous menu.
Keys for selecting a program
To switch windows.
To close and open a folder submenu.
To move the cursor thru the elements of the window.
To import the selected program.
To cancel the selection and close the program listing.