Fagor CNC 8070, Руководство по эксплуатации

Страница: 221 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operating manual
CNC 8070
TOOL
AND MAGA
Z
INE TABLE
To
ol
t
abl
e
9.
(S
OFT
V03.0
X
)
187
Tool life monitoring
This group shows the data related to tool life monitoring. If a tool has been defined
with several offsets, it is possible to manage the status of each one.
When managing the live of two or more offsets of the same tool, the list of the
magazine positions (magazine table) only shows whether the tool has been rejected
or not.
Type
It is used to activate and select the type of tool life monitoring (in time or number of
operations).
Nominal life
Machining time (in minutes) or number of operations that the tool may carry out.
Real (actual) life
Machining time or number of operation the tool has carried out. The CNC updates
this value when the tool is being used.
Tool magazine
This information cannot be modified if the tool is in the spindle, on the changer arm
or in the magazine.
Size
Tool size. The size determines the number of positions (pockets) the tool occupies
in the magazine.
Positions to the right / Positions to the left
Space reserved in the magazine for the tool to the right and to the left of its position.
This data can be defined when the tool size is "custom".
Size Magazine positions it occupies.
Small It only occupies its position. It takes no extra position.
Medium It takes half of an additional position to the right and to the left.
Large It takes a full additional position to the right and to the left.
Custom The user defines the number of additional positions the tool
occupies to its right and to its left.
(A) Small tool.
(B) Large tool.
1
2 3 4 5 6 7
A A B B