Fagor CNC 8070, Руководство по эксплуатации, Страница: 70 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operating manual
CNC 8070
3.
AUTOMATI
C
MODE
Di
spl
a
yi
ng t
h
e
a
u
to
m
a
ti
c m
o
de
(S
OFT
V03.0
X
)
36
3.1.2 Description of the general status bar
The general status bar shows the following information associated with the automatic
mode:
A. Program selected in the active channel for execution.
The background color of the window will be different depending on the program
status.
B. Icon showing the status of the program of the active channel:
The background color will be different depending on the status of the program.
C. Number of the block in execution.
D. Active CNC message.
For each channel, it shows the last message activated by the program that is
running. The window shows the last message of the active channel. If there are
messages in other channels, it will highlight the "+" sign next to the message
window. To display the list of active messages, press the key combination
[CTRL]+[O].
The list of messages shows, next to each message, the channel where it is active.
E. Icon that indicates that the "Single-block" execution mode is active. This execution
mode is selected from the operator panel.
Program waiting to be executed.
Background color: White.
Program in execution.
Background color: Green.
Program interrupted.
Background color: Dark green.
Program in error.
Background color: Red.
A
B C
D E