Fagor CNC 8070, Руководство по эксплуатации

Страница: 102 / 358

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡
Operating manual
CNC 8070
4.
MANUAL (
J
OG)
MODE
O
per
at
io
n
s
wi
th
t
he
axe
s
(S
OFT
V03.0
X
)
68
4.2.2 Jogging the axes
The axes may be jog using the JOG keyboard on the operator panel. Two types of
movements may be made.
• Continuous jog, when the axis moves while acting on the keyboard.
• Incremental jog, when the axis moves a specific distance every time the operator
acts on the keyboard.
The type of jog is selected with the jog selector switch on the operator panel.
JOG keys
There are two types of jog keyboards depending on the behavior of the keys.
Type I
Type II
Feedrates
Continuous jog Incremental jog Handwheels
There are two keys for each axis. One to jog the axis in the positive direction and
another one to move it in the negative direction.
To move a single axis, press the axis key and the one for its jogging direction.
There is a key for each axis and two keys for moving direction, common to all the axes.
To jog an axis requires activating both the axis key and the moving direction. There
are two options, depending on how the jog keyboard has been configured.
• The axis will move while both keys are pressed, the axis key and the direction key.
• When pressing the axis key, the key remains active. The axis will move while the
direction key is kept pressed. To de-select the axis, press [ESC] or [STOP].
The movement is carried out at the feedrate defined by the OEM. The feedrate may
be varied between 0% and 200% using the feedrate override switch on the operator
panel.