Extreme Networks ExtremeWare 7.5, Справочник по командам

Страница: 258 / 2546

258 ExtremeWare 7.5 Command Reference Guide
Commands for Configuring Slots and Ports on a Switch
For version 2.0 and 4.0:
In addition to the physical port, VLAN, and virtual port, the traffic filter can be defined based on the
following criteria:
• MAC source address/destination address —All data sent to or received from a particular source or
destination MAC address is copied to the monitor port.
For MAC mirroring to work correctly, the MAC address must already be present in the forwarding
database (FDB). You need to enable and configure FDB for MAC mirroring to work correctly. See “FDB
Commands” for more details.
Example
The following example sends all traffic coming into or out of a stand-alone switch on port 1 and the
VLAN
default to the mirror port:
configure mirroring add ports 1 vlan default
The following example sends all traffic coming into or out of a modular switch on slot 3, port 2 and the
VLAN
default to the mirror port:
configure mirroring add ports 3:2 vlan default
History
This command was first available in ExtremeWare 2.0.
This command was modified in ExtremeWare 4.0 to support modular switches.
This command was modified in ExtremeWare 6.0 to discontinue support for the MAC address
parameter.
This command was added to the Summit “ e ” series of switches in ExtremeWare 7.1e.
This command was modified in ExtremeWare 7.2e to add filtering for VLANs, MAC addresses, and
virtual ports.
Platform Availability
This command is available on all platforms.