Extreme Networks ExtremeWare 7.5, Справочник по командам

Страница: 1811 / 2546

enable ospf export rip
ExtremeWare 7.5 Command Reference Guide 1811
enable ospf export rip
For “i” series switches:
enable ospf export rip [cost <metric> [ase-type-1 | ase-type-2] {tag
<number>} | <route map>]
For “e” series switches:
enable ospf export rip [cost <metric> [ase-type-1 | ase-type-2] {tag
<number>}]
Description
Enables the redistribution of RIP to OSPF.
Syntax Description
Default
The default tag number is 0. The default setting is disabled.
Usage Guidelines
After it is enabled, the OSPF router is considered to be an ASBR.
This command enables the exporting of RIP by way of LSA to other OSPF routers as AS-external type 1
or type 2 routes.
The cost metric is inserted for all BGP, VIP, RIP-learned, static, and direct routes injected into OSPF. The
tag value is used only by special routing applications. Use 0 if you do not have specific requirements for
using a tag. The tag value in this instance has no relationship with 802.1Q VLAN tagging.
When re-distributing RIP routes, you should turn off RIP aggregation unless you are expertly familiar
with the possible consequences and impact. By default, new configurations of RIP using ExtremeWare
4.0 and above disable RIP aggregation. In previous ExtremeWare versions, RIP aggregation is enabled
by default. This configuration is preserved when upgrading to ExtremeWare 4.0. Verify the
configuration using the command
show rip
.
Example
The following command enables the exporting of RIP to OSPF:
enable ospf export rip cost 1 ase-type-1 tag 0
metric Specifies a cost metric.
ase-type-1 Specifies AS-external type 1 routes.
ase-type-2 Specifies AS-external type 2 routes.
number Specifies a tag value.
route map Specifies a route map name.
NOTE: This option is only available on “i ” series switches.