Extreme Networks ExtremeWare 7.5, Справочник по командам

Страница: 672 / 2546

672 ExtremeWare 7.5 Command Reference Guide
Commands for Status Monitoring and Statistics
configure flowstats timeout ports
configure flowstats timeout <minutes> ports [<portlist> | all]
Description
Configures the timeout value for flow records on the specified ports.
NOTE
This command is available only on the “i” series switches.
Syntax Description
Default
Five minutes
Usage Guidelines
The timeout is used to export flow records on an age basis. All flow records are examined at least once
every 30 minutes. If the age of the flow record is greater than the configured timeout, the record is
exported. If the flow is still active, a new flow record will be created when the next packet arrives.
For the PoS module, the
minutes
parameter is an integer in the range [1-1440].
Example
The following command configures a timeout value of 15 minutes for ports 1-8:
configure flowstats timeout 15 ports 1-8
This means that flow records for these ports will be exported after they have aged 15 minutes.
History
This command was first available in ExtremeWare 6.1.5b20 for the PoS module only.
This command was first available in ExtremeWare 6.2 for all “ i ” series platforms.
Platform Availability
This command is available only on the “i ” series platforms.
minutes Specifies the number of minutes to use in deciding when to export flow records. The default is five
minutes.
portlist Specifies the ports to which the timeout applies. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8.
all
indicates that the timeout should be set for all ports on this switch.
NOTE: The parameter
any
is not supported for the PoS module.