Extreme Networks ExtremeWare 7.5, Справочник по командам

Страница: 2283 / 2546

configure inline-power display-string configure inline-power label ports
ExtremeWare 7.5 Command Reference Guide 2283
configure inline-power display-string
configure inline-power label ports
For the Alpine series PoE modules:
configure inline-power display-string <string> ports <portlist>
For the Summit 300-48 switch:
configure inline-power label <string> ports <portlist>
Description
Lets you create your own label for a specified power port.
NOTE
This command is available only for the Alpine FM-32Pi PoE Module and the Summit 300-48 switch.
Syntax Description
Default
No label
Usage Guidelines
Use the
show inline-power configuration port <portlist>
command, as shown in the following
example, to display inline power configuration information, including the display string (if any) for
each port. The display string is shown under the “Label” column:
show inline-power configuration port 1:1-1:7
Following is sample output from this command:
Port Config Detect Rsvd Pwr Oper Lmt Viol Prec Label
1:1 enabled auto 0.0 15.4 max-class-operator
1:2 enabled auto 10.0 15.4 advertised-limit test_port2
1:3 enabled auto 0.0 15.4 max-class-operator
1:4 enabled auto 0.0 15.4 max-class-operator
1:5 enabled auto 0.0 15.4 max-class-operator
1:6 enabled auto 0.0 15.4 max-class-operator test_port6
1:7 enabled auto 0.0 15.4 max-class-operator
Example
On an Alpine switch, the following command assigns the name alpha-test_1 to port 1 on slot 4:
config inline-power display-string alpha-test_1 ports 4:1
string Specifies a name up to 13 characters long to identify the specified power port(s).
portlist Specifies one or more slots and ports. On a modular switch, can be a list of slots and ports. On a
stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5, 1:*, 1:5, 1:6-1:8,
2:*, 2:5, 2:6-2:8.