Extreme Networks ExtremeWare 7.5, Справочник по командам

Страница: 2368 / 2546

2368 ExtremeWare 7.5 Command Reference Guide
LLDP Commands
show lldp ports neighbor
show lldp ports [all | <portlist>] neighbor {detailed}
Description
Displays the information related to the LLDP neighbors detected on the specified port or ports.
Syntax Description
Default
N/A.
Usage Guidelines
N/A.
Example
The following example displays LLDP neighbor information for switch port 5:24, which has been
enabled for LLDP.
# show lldp ports 5:24 neighbors
LLDP port 5:24 Total neighbors = 1
Neighbor:
Chassis ID (subtype 4): 00:04:96:1F:A4:06
Port ID (subtype 5): 23
TTL : 120 seconds
Port Description :
System Name : SummitX450-24t
System Description : ExtremeWare X0S version 11.2.0.9 v1120b9 by release-manager on
Thu
Feb 24 13:04:06 PST 2005
System Capabilities Supported:
Router
Bridge
System Capabilities Enabled:
Bridge
Management Address : 10.210.51.3
Interface subtype: ifIndex
Interface Number : 1000006
Extended TLV Info 802.3 OUI (hex value) = 00-12-0f
-MAC PHY Configuration & Status
-Auto-negotiation Support & Status : Supported, enabled
-Advertised capability bits (hex value): 6c01
all Applies to all ports on the switch.
portlist Specifies a list of switch ports in the form i:*, i:n, or i:n-i-m.
detailed Shows information on the configured VLANs on the port.