Extreme Networks ExtremeWare 7.5, Справочник по командам

Страница: 1272 / 2546

1272 ExtremeWare 7.5 Command Reference Guide
Wireless Commands
configure wireless ports interface ap-scan off-channel
configure wireless ports [<portlist> | all] interface [1 | 2] ap-scan
off-channel <add | del> {current-channel | channel-number | all-channels |
every-channel}
Description
Adds or removes specific channels for the off-channel access point (AP) scan.
Syntax Description
Default
All channels.
Usage Guidelines
Use this command when the AP scan must be started on a particular interface.
Example
The following command causes scans on the current channel for wireless port 1:5 using interface 2:
configure wireless ports 1:5 interface 2 add current channel
History
This command was first available in ExtremeWare 6.2a and added to the “ e ” series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
portlist Specifies one or more ports or slots and ports. an be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
all Specifies all ports.
interface Specifies an interface: 1 or 2.
add Specifies to add the specific channel.
del Specifies to delete the specific channel.
current-channel Specifies to perform the scan on the current channel only.
channel-number Specifies to perform the scan on the channel indicated.
all-channels Specifies to perform the scan on all channels in a given country code.
every-channel Specifies to perform the scan on all channels regardless of the country code.
No beacons are sent on out-of-country-code channels.