Extreme Networks ExtremeWare 7.5, Справочник по командам

Страница: 153 / 2546

configure snmpv3 add notify
ExtremeWare 7.5 Command Reference Guide 153
configure snmpv3 add notify
configure snmpv3 add notify {hex <hex value>} <notify name> tag {hex <hex
value>} <tag> {volatile}
Description
Add an entry to the snmpNotifyTable.
Syntax Description
Default
The default storage type is non-volatile.
Usage Guidelines
Use this command to add an entry to the snmpNotifyTable. When a notification is to be sent, this table
is examined. For the target addresses that have been associated with the tags present in the table,
notifications will be sent, based on the filters also associated with the target addresses.
Example
Use the following command to send notification to addresses associated with the tag type1 :
configure snmpv3 add notify N1 tag type1
History
This command was first available in ExtremeWare 7.1.0.
This command was added to the Summit “ e ” series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
hex Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
notify name Specifies the notify name to add.
tag Specifies a string identifier for the notifications to be sent to the target.
volatile Specifies volatile storage.