Extreme Networks ExtremeWare 7.5, Справочник по командам

Страница: 1096 / 2546

1096 ExtremeWare 7.5 Command Reference Guide
Configuration and Image Commands
configure wireless ports image
configure wireless ports [<portlist> | all] image [bootstrap | bootloader |
runtime] [<ip address> | <hostname>] [<hostname/ip address> <filename>]
Description
Use this command to configure the image location for a wireless port.
Syntax Description
Default
By default the image location and path information are set to null.
Usage Guidelines
To configure Direct Connect ports, use the IP address of the wireless management VLAN for Direct
Connect ports.
To configure Remote Connect ports, use the IP address of the VLAN that the Remote Connect APs are
members of. This may not be the same as the wireless management VLAN.
A wireless port cannot be enabled if you have not configured runtime parameters for it.
Example
The following example configures a wireless port to download its image files from the TFTP server
called tftphost at IP address 10.12.123.1:
configure wireless ports 1:1 image bootstrap tftphost/10.12.123.1 ABS-1_8_0.bin
configure wireless ports 1:1 image bootloader tftphost/10.12.123.1 ABL-1_11_2.bin
configure wireless ports 1:1 image runtime tftphost/10.12.123.1 ART-7_5_8.bin
History
This command was first available in ExtremeWare 7.5.
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be
in the form 1, 2, 1:2, 3-5.
all Specifies all ports.
bootstrap Specifies the bootstrap image.
bootloader Specifies the bootloader image
runtime Specifies the runtime image
ip address Specifies the IP address of the TFTP server.
hostname Specifies the hostname of the TFTP server.
hostname/filename Specifies the path for the file on the server that contains the specified image.
filename Specifies the name of the file on the server that contains the specified image.