background image

 

1418

ExtremeWare 7.5 Command Reference Guide

EAPS Commands

create eaps

create eaps <name>

Description

Creates an EAPS domain with the specified name.

Syntax Description

Default

N/A.

Usage Guidelines

The 

name

 parameter is a character string of up to 32 characters that identifies the EAPS domain to be 

created. EAPS domain names and VLAN names must be unique: Do not use the same name string to 
identify both an EAPS domain and a VLAN.

On “

e

” Series of Switches.  

Only four EAPS domains per switch are supported and these domains 

must share a common ring port.

Example

The following command creates EAPS domain eaps_1:

create eaps eaps-1

History

This command was first available in ExtremeWare 6.2.

This command was added to the Summit “

e

” series of switches in ExtremeWare 7.1e. 

Platform Availability

This command is available on all platforms.

name

Specifies the name of an EAPS domain to be created. May be up to 32 
characters in length.

Содержание ExtremeWare 7.5



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы: