Extreme Networks ExtremeWare 7.5, Справочник по командам

Страница: 914 / 2546

914 ExtremeWare 7.5 Command Reference Guide
Security Commands
configure tacacs server
For the “ i ” switches:
configure tacacs [primary | secondary] server [<ipaddress> | <hostname>]
{<L4 port no>} client-ip <ipaddress>
For the “ e ” switches:
configure tacacs [primary | secondary] server [<ipaddress> | <hostname>]
{<L4 port no>} client-ip [<ipaddress>]
Description
Configures the server information for a authentication server.
Syntax Description
Default
uses TCP port 49.
Usage Guidelines
Configure the server information for a server.
To remove a server, use the following command:
unconfigure tacacs
Use of the
hostname
parameter requires that DNS be enabled.
Example
The following command configures server tacacs1 as the primary server for client switch
10.10.20.35:
configure tacacs primary server tacacs1 client-ip 10.10.20.35
History
This command was first available in ExtremeWare 6.1.
primary Configures the primary server.
secondary Configures the secondary server.
ipaddress Specifies the IP address of the server being configured.
hostname Specifies the host name of the server being configured. Must be able to be resolved to
an IP address.
L4 port no Specifies the L4 port used to contact the server.
NOTE: This option is available only on the “ i ” switches.
ipaddress The IP address used by the switch to identify itself when communicating with the
server.