Extreme Networks ExtremeWare 7.5, Справочник по командам

Страница: 941 / 2546

create access-mask
ExtremeWare 7.5 Command Reference Guide 941
create access-mask
create access-mask <access-mask name> {dest-mac} {source-mac} {vlan} {tos
|code-point} {ethertype} {ipprotocol} {dest-ip/<mask length>}
{source-L4port | {icmp-type} {icmp-code}} {permit-established} {egressport}
{ports} {precedence <number>}{vlan-pri}{vlan-pri-2bits}
Description
Creates an access mask.
NOTE
This command is available only on the “e” series switches.
Syntax Description
access mask name Specifies the name of the access-mask.
dest-mac Specifies the destination MAC address.
source-mac Specifies the source MAC address.
vlan Specifies the VLANid.
tos Specifies a 3-bit precedence field within the IP ToS field. Valid entries are from 0 to 7.
code-point Specifies a 6-bit DiffServ code point. Valid entries are from 0 to 63.
ethertype Specifies the Ethernet type field.
ipprotocol Specifies the IP protocol.
dest-ip Specifies the destination IP address.
source-ip Specifies the source IP address.
mask length Specifies the IP mask length
dest-L4port Specifies the destination TCP/UDP port.
source-L4port Specifies the source TCP/UDP port.
icmp-type Specifies the ICMP type.
icmp-code Specifies the ICMP code.
permit-established Specifies the TCP SYN and ACK bits. It is specified when IP protocol is implicit and need
not be specified separately.
egressport Specifies the egress port.
ports Specifies one or more ingress ports.
precedence Specifies the access-mask precedence, which determines the precedence of the
associated access list.
vlan-pri Specifies the 802.1p priority of the VLAN tag, which is a three-bit field. Valid values are 0
to 7.
vlan-pri-2bits Specifies the two most significant bits of the vlan-pri field.
bgp-community Specifies that the profile entries will be a list of BGP community numbers. Not supported
on the Summit 400 switch.
vlan Specifies that the profile entries will be a list of VLANs