9
www.euroklimat.it
1.0 GENERAL INFORMATION AND SAFETY
1.4
ATTACHED DOCUMENTS AND ASSISTANCE
The following documents are supplied to the customer with the equipment:
•
USAGE AND MAINTENANCE MANUAL
–
This document containing all of the information relating to installation, usage and maintenance of
the equipment.
•
DECLARATION OF CONFORMITY
- Document cont
aining the “A” class EC type Declaration of Conformity
, the PED Declaration of Conformity
and the Acceptance Certificate. Below is an example of the aforesaid document. As annex
A
at the back of this manual you can find the
previously mentioned Declaration of Conformity for the machine purchased.
•
ELECTRICAL DIAGRAM
–
indicating all of the internal electrical connections and external interfaces and information about the various loads
for sizing of the protections and connections.
•
SPARE PARTS LIST
–
List of the parts installed on the machine. It is possible to view the list of recommended spare parts. To view the
previously mentioned document, consult
“
WebService
”
.
•
DIMENSIONAL DRAWING
–
Representing the construction detail of the equipment with special instructions for the connections and
interfaces to the surrounding systems. To view the previously mentioned document, consult
“
WebService
”
.
For further documentation, consult the documents online 24h 365 days a year at the web address http://webservice.euroklimat.it/ (accessing
your personal account with ID and password).
Remember that the maintenance manager (company and/or employee) is responsible for compiling the:
MAINTENANCE HANDBOOK
–
It will contain a list of the operations of routine maintenance and is designed to record all operations carried out,
including supplementary maintenance.
Indications on the recommended intervals of maintenance, which must be reported in the handbook, can be found by consulting the norm EN
378-4:2017 Refrigeration systems and heat pumps
–
Safety and environmental requirements
–
Part 4: Management, maintenance, repair and
recovery. An extract of the previously mentioned regulation is reported in annex
B
at the back of the manual.
The manufacturer relies on external service centres, which are assessed and subsequently
“Aut
horised
”
to operate on the equipment.
Unauthorised members of staff are not permitted to operate on the units. In the event of a fault or anomaly, contact the authorised service
centre directly. The request must be made indicating the sensitive data of the equipment, which can be found on the identification plate
(particularly the series number). It is necessary to report the type of fault including the error identification code that appears on the display, as
well as the indicative operating time. Remember to arrange clear spaces for the machine free of obstacles to facilitate intervention by operators.
