4
www.euroklimat.it
1.0 GENERAL INFORMATION AND SAFETY
1.0
GENERAL INFORMATION AND SAFETY
1.1
UNIT IDENTIFICATION
The equipment can be identified by the
“
Identification Plate (EC)
”
located on the machine. It contains the unit
SERIES
number and the main technical data. The series number is essential for spare part requests or technical
assistance. We advise you to make a note of the machine number and keep it in a safe place. The plate must
always be fixed on the machine to provide anyone accessing it with the basic information about the equipment.
In the event of damage to the Identification Plate (EC) request a duplicate from the
Manufacturer’s Technical
Assistance Office.
A further element of identification is represented by the
“
machine model
”
, which allows the type of construction,
important configurations and general characteristics to be traced. The machine model can always be found on
the identification plate and by putting together the information obtained from these two elements, it is possible
to gain a clear understanding of the equipment being used. The letters that make up the code consist of various
digits, each of which has a precise meaning. The example shown below indicates, conceptually, the contents of
the code and the different potential applications. Nonetheless, the Company reserves the right to change the
letters without notice.
1.2
GUARANTEE AND AUTHORISED OPERATORS
The machine that is the object of this manual is subject to the guarantee form described below, which is considered to have been accepted and
signed automatically by the client in the order phase to the Manufacturer with the signing in acceptance of the order confirmation. The supplying
company guarantees the excellent construction and quality of the supply, undertaking, at its own discretion, during the guarantee period
specified below, to repair or resupply, as soon as possible, parts containing acknowledged faulty materials, construction or workmanship, making
them unsuitable for their intended purpose. Provided this is not caused by negligence on the part of the customer, normal wear and tear or use,
negligent or inexpert use, damage by third parties, fortuitous events or events of force majeure or other causes, which cannot be attributed to
faults in the quality of the construction.
EKS - BP / BS / AS 110-3-1 1ps SP
SP
–
special configuration
Machine model
Equipment
Family group
Configuration
Version
BP
= Base (plate evaporator)
BS
= Base (shell and tube evaporator)
IP
= Integrated (plate evaporator)
IS
= Integrated (shell and tube evaporator)
BS
= Business
BS/LN
= Bu low noise
BS/SL
= Bu Super low noise
HE
= High efficiency
HE/LN
= High effi low noise
HE/SL
= High effi Super low noise
AS
= Standard
DS
= Desuperheater
HR
= Total Recovery
Pump/s
–
only for IP and IS solution
1ps
= 1 pump / standard pressure
2ps
= 2 pumps / standard pressure
1px
= 1 pump / “x” pressure
2px
= 2 pumps / “x” pressure
