50
www.euroklimat.it
STABILITY AND REACTIVITY
Stability and reactivity
Stable in normal conditions.
No decomposition if used according to the specific instructions.
Substances to avoid
Alkaline metals, earthy alkaline metals, granulated metal salts, Al, Zn, Be etc. in powder.
Dangerous decomposition products
Halogen acids, traces of carbonyl halides.
TOXICOLOGICAL INFORMATION
General: Inhalation of high concentration decomposition products can cause respiratory failure (pulmonary oedema)
ECOLOGICAL INFORMATION
General
Damage to the environment caused by this product is unknown.
DISPOSAL CONSIDERATIONS
General
Do not dispose of where a build-up may be dangerous.
Contact the supplier if instructions for use are required.
TRANSPORT INFORMATION
UN Nr 3163
Class/Div 2.2
ADR/RID Nr 2,2 A
Label ADR: Label 2 : non toxic non inflammable gas.
Further transport information
: Avoid transport on vehicles where the loading area is not separate from the cabin
Ensure that the driver is aware of the potential risk of the load and knows what to do in the event of an accident or emergency
Before starting transport, check that the load is well secured and:
•
Ensure that the cylinder valve
is closed and doesn’t leak
•
Ensure that the blind plug of the valve, where provided, is fitted correctly
•
Ensure that the cap (where provided) is fitted correctly
•
Ensure that there is adequate ventilation.
•
Ensure compliance with the current provisions
REGULATION INFORMATION
Number in annex 1 of the Dir 67/548
Not included in annex I.
EEC Classification Proposal by the Trade Association.
Not classified as a dangerous substance.
Cylinder labelling
Symbols
Use the symbols foreseen by ADR.
Label 2:
non-inflammable not toxic gas.
Risk phrases RAs
High concentrations can cause asphyxia.
Safety advice S9
Keep the container in a well-ventilated area.
S23
Do not breathe in the gas.
OTHER INFORMATION
Ensure compliance with all of the regional and national regulations. The risk of asphyxia is often underestimated and must be clearly highlighted during operator
training. Contact with the liquid can cause freeze burns. Before using this product in any new process or experiment, a detailed study must be carried out on the
safety and compatibility of the product with the materials. The information contained in this document is to be considered valid at the time of print. The company
is not responsible for any damage caused by using the product in incorrect applications and/or in conditions different to those foreseen.
‘‘
The information in this SDS is provided to protect health and safety in the workplace. No responsibility is accepted for damage caused by using this information
for different purposes to those stated.
’’
