Epson C204001 - DFX 8500 B/W Dot-matrix Printer, Руководство пользователя

Страница: 96 / 252

This button can also be used to run the
printer’s NLQ self test. See “Printing a Self
Test” in Chapter 8.
c
Caution:
Never press the
Tear Off button when labels are loaded in
the printer. Use the
LF/FF Load
button to feed the printed
labels to a point where they can be torn off.
LF/FF Load LF advances paper one line at a time. To
feed your paper forward one line, press
this button once.
FF advances continuous paper to the top of
the next page. Press and hold the button
for about one second.
Load loads paper on the push tractor of
the selected paper path when no paper is
currently loaded.
This button can also be used to run the
draft self test. See “Printing a Self Test” in
Chapter 8.
Micro Feed
These two buttons advance or reverse the
loaded paper in 1/216-inch increments.
The top button advances the paper and the
bottom button reverses it. You can use
these buttons to adjust the top-of-form,
tear-off, and printing positions.
To reset the top-of-form position, press
the
TOF button to enter top-of-form mode.
Then use the Micro Feed buttons to move
the paper to the desired position. See
“Adjusting the top-of-form position” in
Chapter 3.
L
Peony Rev.C
A5 size Chapter 4
98/01/07 Pass 4
4-6 Using the Printer