Epson C204001 - DFX 8500 B/W Dot-matrix Printer, Руководство пользователя

Страница: 77 / 252

Tearing Off the Printed Pages
After you finish printing, you can use the tear-off feature to
advance continuous paper on the push tractor to the tear-off
edge of the printer. You can then easily tear off printed sheets.
When you resume printing, the printer automatically feeds
paper back to the loading position.
This feature lets you save paper that would normally be lost
between documents.
You can use the tear-off feature in two ways: by turning on
DIP switch 3-1 to select automatic tear-off mode, or by pressing
the
Tear Off button on the control panel. (See Chapter 4 for
information on changing DIP switch settings.)
If the perforation between pages is not aligned with the tear-off
edge, you can adjust the tear-off position using the micro-feed
feature. The printer remembers this new tear-off position.
c
Caution:
Never use the tear-off feature to reverse feed labels, overlapping
multi-part forms, continuous forms with labels, or overlapping
multi-part forms with labels. Do not use the tear-off feature
when the optional pull tractor is installed or when using the
paper memory feature (described in Chapter 4).
Tear-off mode
When you select tear-off mode with DIP switch 3-1, the printer
automatically advances continuous paper to the tear-off
position when you finish printing.
The printer advances paper to the tear-off position only when
the printer receives a full page of data or a form feed command
and no more data is received for three seconds.
3
R
Peony Rev.C
A5 size Chapter 3
98/01/07 Pass 4
Paper Handling 3-21