3. If you loaded new paper onto the current tractor since the
last time you cut off a document, you may need to adjust
the cutting position. Open the paper separator cover and
use the
Micro Feed
buttons to adjust the cutting position
with the cutting line. Then close the paper separator cover.
Note:
You can set the cutting position, from 3.0 mm (0.12 inch) to
25.4 mm (1.0 inch) below the perforation at the end of the last
printed page. The factory setting of the cutting position is
3.0 mm (0.12 inch) below the position.
4. Press the
Tear Off
button. The printer cuts off your printed
document and feeds the fresh paper back to the top-of-form
position.
5-24-A
5-24-B
6
R
Peony
Rev.C
A5 size
Chapter 6
98/01/07
Pass 4
Using Printer Options
6-29
Содержание C204001 - DFX 8500 B/W Dot-matrix Printer
